Keep children and pets out of the area until foot traffic resumes.
Installation
Read entire label before using. Use only as directed. Always test in a small inconspicuous area with a 24hr cure time to determine ease of application & desired results. Allow new grout installations to cure for a minimum of 72hrs prior to application. Make sure surface is clean & free of waxes & coatings. Sealer may be applied to damp surfaces one hour after st&ing water has been removed. Surface temperature should be between 50-80F. Ensure that the area is well-ventilated during application & until the surface is dry. 1. Mask any surfaces not intended to be treated. 2. Liberally apply an even coat using a paint pad roller or brush. DO NOT APPLY PRODUCT WITH SPRAYER. 3. Allow sealer to penetrate the surface for 15 30mins. During this time distribute sealer over entire area to ensure even penetration. Remove excess sealer by wiping entire surface thoroughly with
Care
Routine maintenance and cleaning of the grout is required. Clean up spills as they occur.